Ultra-Fab 5th Wheel King Pin Tripod Stabilizer - Steel - 37" to 50" - 5,000 lbs
(308 reviews)
Price: $166.06
In Stock
Ultra-Fab 5th Wheel King Pin Tripod Stabilizer - Steel - 37" to 50" - 5,000 lbs
Item # UF19-950001
Retail:$239.99
Our Price: $166.06
You Save: $73.93
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (308)
- Q & A (0)
- Photos
Ultra-Fab Products Camper Jacks - UF19-950001
- Fifth Wheel Camper
- Stabilizer Jacks
- Tripod Stabilizer
- 4001 - 5000 lbs
- 1 Jack
- Ultra-Fab Products
- Not Mounted
- Steel
Quickly and easily stabilize your unhitched fifth-wheel trailer with this sturdy steel tripod. Adjustable hitch cup makes setup a snap, and the included padlock provides an effective theft deterrent.
Features:
- Tripod holds your parked 5th-wheel trailer steady at the king pin
- Helps to eliminate front-to-back and side-to-side motion of unhitched trailer or RV
- Threaded hitch cup allows for easy height adjustment
- Turn the handle counterclockwise to raise cup, clockwise to lower it
- Included padlock inserts through holes in hitch cup to prevent removal of king pin
- Collapsible design
- Handles fold down once desired height is reached
- Tripod folds up for storage
- Extension legs (UF19-950002 - sold separately) available for applications requiring additional height
- Large footplates help to prevent sinking and tilting
- Heavy-duty steel construction
Specs:
- Support capacity: 5,000 lbs
- Height: 37" - 50"
- Footplate dimensions: 5" wide x 5-1/2" long
- Weight: 24 lbs
- Lifetime warranty
After unhitching your fifth-wheel trailer or RV, steady it with the Ultra-Fab tripod stabilizer. Simply position the tripod beneath your trailer's king pin and release the chain that holds the stabilizer hitch cup in place. The hitch cup will rise and surround the king pin. Reattach the chain by hooking a bottom link around the bracket on the tripod leg. Now use the handle on the hitch cup to fine-tune the height of the stabilizer. Turn counterclockwise until the cup is sufficiently snug against the fifth-wheel king pin. Once everything is in place, insert the included padlock and your trailer will be stable, supported and secure.
19-950001 UltraFab Kingpin Stabilizer - Steel
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Ultra-Fab 5th Wheel King Pin Tripod Stabilizer - Steel - 37" to 50" - 5,000 lbs - UF19-950001
Average Customer Rating: 4.6 out of 5 stars (308 Customer Reviews)
Quickly and easily stabilize your unhitched fifth-wheel trailer with this sturdy steel tripod. Adjustable hitch cup makes setup a snap, and the included padlock provides an effective theft deterrent.by: Kevin M.01/05/2015
Delivery was incredibly fast( within a couple days!). Like other reviews, I was very please how good the stabilizer minimized movement on our 5th wheel camper.
I have made several purchases from etrailer.com and have been satisfied each time with prices,product and speed of delivery!
THANKS
by: Janet 01/21/2024
We have had for a year now and has done what we wanted it to do. This has made our camper so much more stable for us.
by: Leonard10/10/2023
It is doing a wonderful job of supporting this big heavy unit. We are very happy with the tripod.
by: Jeffrey 09/19/2023
Just what i needed. As a frequent customer, I can tell you first hand that etrailer is by far the fastest, friendliest and reasonably-priced website I have ever used. Best ever!
by: David10/21/2023
It really helped steady our 5th wheel.
by: Don S.04/03/2016
Cannot say enough good things about etrailer. While away for the winter in Arizona I ordered a tripod for our 5th wheel. By mistake I switched mailing and billing addresses around and did not notice it until checking tracking. With one call to etrailer everything was taken care of and received the package in a few days. Thank you for your outstanding customer support!
The tripod arrived well packaged and is of excellent quality! I recommend this item to anyone who is looking for a well designed tripod. I have purchased many items from etrailer in the past and am still amazed at the customer service!
by: David08/08/2018
The Product is excellent however the extensions and the foot plates are not quite right and had to be persuaded to go together. It other wise worked well.
by: Rod03/04/2017
Looks sturdy. Well built. Took the wobble out. Good for stabilizing. Came with lock. Glad I was able to purchase. Shipping was fast.
by: Scott11/02/2021
The ultra fab fifth wheel king pin tripod works excellent the leveling jacks on my fifth wheel were leaking off and the tripod did it’s job I am very pleased with this product and have told other fifth wheel owners about itOne of the people I told but one I don’t know if the other people have yet or not but I would recommend it to anybody
by: Bob 03/04/2023
The tripod worked great. I definitely need to invest in the extensions. There was a time or two that would have been helpful. But overall a great product.
by: Larry 10/06/2023
Great product. Fits with wide range of adjustments. Free shipping received it in only 2 days. Very happy with you all once again.
Thanks
by: Travis10/28/2023
It's as exciting.
by: Zell04/16/2013
I have not owned a fifth wheel until now, so alot of the equipment necessary is rather new to me. My son-in-law is the GURU when it comes to this and he was impressed w ith the quality & price for the tripod stabilizer and the slide-out stabilizers Wheel chocks will also serve their purpose. I was very impressed with the speed in which I received all this equipment. I will be sure to use you in the future for further purchases.
Zell
4/16/2014
Everything is still in grerat condition. These items are used on our fifth wheel that is located on the Gulf Coast of Florida next to salt water and they have held up remarkably well.
by: Randy12/08/2022
I did not do enough research and wish I would have bought an easier to use product. My son-in-law has a stabilizer that works much better.
by: Ward02/21/2017
Just wanted to let people know I have ordered other products from etrailer before and each item has met my expiations and the price is the best part the lowest of any other site I looked at that's why I will keep coming back.
Ward
2/21/2018
We use it all the time it helps stabilize the 5th wheel when its windy out and when were walking around
by: BRIAN C09/17/2019
Use it all the time I love the design of it
by: Bryan belair06/19/2018
Nice product would recommend make sure to purchase the extensions with your order arrived in a timely manner great job etrailer will be ordering again from you
Bryan B.
6/19/2019
Works great helps stabilize the unit
by: Loyd 04/27/2017
This works great, would have given a 5 star rating except the cup at top is too deep for our hitch pin. Have to carry some large washers to lessen the depth.
Loyd
5/4/2018
Works well, still need to add washers as cup too deep for my king pin!
by: Steve B11/12/2016
This is a good product, however it has some drawbacks. My trailer has the trail-aire air ride fifth wheel pin box. This stand doesn't work very well with it. There isn't enough travel in the adjustment bolt to compress the jaws of the pin box. Without that, the stand doesn't really offer much support. I have found I can let the air out of the bag, and jack the trailer up slightly higher than where I want it, and then let the trailer down on top of it. Once the trailer is down on the stand and level, I put some air back in the bag just to put some weight on the stand. I have used it only twice, I will figure out the best method as time goes. Note: I suggest you order the extensions. There are times where you will need the extra length.
by: Michael02/13/2021
I'm giving it 5 stars because it came on the day they said it was going to get to me. I haven't opened it yet ill do that in a few weeks when we are going camping. If anything is wrong with it I'll get back on and let you know
Michael
2/14/2022
This is working our just fine the camper doesnt move around as much when doing laundry
by: Riley L09/29/2020
Very good product, light weight but strong, easy to use and does a good job. Used for a month in Florida and helped stabilize our unit.
Riley
10/1/2021
Works great, easy to use.stabilizer does help.
by: Richard M03/20/2020
I purchased the UF19-950001 rv jack after watching a video that showed how easy and fast it was set up. I was having to use blocks under my rv jack and adjust the chains on the bottom of the legs for height . This process took for ever.The UF19-950001 sets up in just a few minutes just like the video showed.
by: Mark07/17/2018
This works great at stabilizing the front end of the fifth wheel. I will they made a small version for the back end of the trailer as the side sway of the back end could definitely use this level of support.
by: Mark07/31/2019
We have used this product for two seasons now. It is easy to use and surprisingly it has reduced most of the rocking motion. We own a 35’ 5th wheel trailer. Get product for the price.
by: Mark S.10/13/2017
I ordered this stabilizer for my Keystone Raptor fifth wheel. The stabilizer arrived very quickly and it was obvious that it had been returned by another customer prior to it being sent to me. The box was held together with a ridiculous amount of tape and there was no styrofoam left inside the box which allowed the stabilizer to destroy the box while en route to my house. The stabilizer is of good quality but, it is too short for my fifth wheel. I ordered the extensions, which I would highly recommend for this item. Together with the extensions, the stabilizer works very well.
25
309
Show More Reviews
See what our Experts say about this Ultra-Fab Products Camper Jacks
- Can a King Pin Stabilizer Jack be Used with a Revolution or SidewinderIt is possible to use a king pin tri-pod stabilizer with a Revolution or Sidewinder, but you would have to install the lockout bolts at the turret to prevent movement or rotation. If the Sidewinder is not locked out, any type of movement in the trailer or from a strong wind would allow the pin box to rotate slightly, which could reduce the effectiveness of the stabilizer, or if severe enough cause damage. If you intend to lockout the pin box, then you will want to choose a tripod jack...
view full answer... - Will Ultra-Fab 5th Wheel King Pin Tripod Stabilizer # UF19-950001 Fit a 2018 Grand Design SolitudeUltra-Fab 5th Wheel King Pin Tripod Stabilizer # UF19-950001 has a height range of 37 inches to 50 inches and a capacity of 5,000 pounds. The distance from the ground to the pin box skid plate where the king pin is attached would need to by within the 37 to 50 inch range and the pin weight under 5,000 pounds when the trailer is level. I checked and the dry pin weight of any of the Grand Design Solitude 5th wheels is well under 5,000 pounds.
view full answer...
- Does Curt CrossWing Have a Tripod AdapterAt this point in time (August 2023) Curt doesn't have anything in the works for a tripod to work with the Curt CrossWing # C86JR so you'll need to remove the adapter if you'll be using a tripod like part # UF19-950001 to further stabilize the front of your 5th wheel trailer. That might end up being a thing later down the road but as of right now they haven't pursued this as of yet.
view full answer... - Weight Capacity of Ultra-Fab Steel 5th Wheel King Pin Tripod StabilizerI checked with Ultra-Fab and the Ultra-Fab 5th Wheel King Pin Tripod Stabilizer part # UF19-950001 has a 5,000 lb weight capacity. That said, it wouldn't be supporting the full pin weight since the landing gear legs are still supporting the trailer but it will bear some weight. The aluminum versions are rated at 1,200 lbs.
view full answer... - Can Ultra Fab King Pin Tripod be Used with Grand Design Solitude 375We've checked in the past and have determined that the Grand Design Solitude 375 uses the Lippert 1621 pin box which the fifth wheel tripod you referenced part # UF19-950001 would easily work great with as the 1621 is the most common pin box out there.
view full answer... - King Pin Tripod Stabilizer For Lippert Flex Air Pin Box On 5th Wheel RVYes, the Ultra-Fab 5th Wheel King Pin Tripod Stabilizer - Steel - 37" to 50" - 5,000 lbs # UF19-950001 will work as long as your pin box height is within 37 to 50 inches and the pin weight is less than 5000 pounds.
view full answer... - Cover and Kingpin Tripod Recommendation for a 2003 Keystone Cougar 5th Wheel TrailerThe 5th wheel cover, # 052963753639, would be the best option for your trailer. The zip off areas may not line up with the door exactly but you will be able to get in. This particular cover is designed for 5th wheel trailers that are up to 106-1/2 inches tall (8 feet, 10 inches) from the bottom of the trailer (not the ground) to the top. We have a few different 5th wheel tripods. For an adjustable unit for 31 inches to 54 inches and 5,000 pound capacity use # UF19-950500. For 37 to 50...
view full answer... - 5th Wheel Toy Hauler Tripod Stabilizer Jack and Trailer Cover RecommendationFor a tripod stabilizer for your 2015 Puma toy hauler you would want the Utra Fab part # UF19-950001 as it has a 5k capacity and would work well for your trailer as long as the pin height is between 37 and 50 inches from the ground. Your trailer should be 37 feet long so for a cover you would want the part # 052963750638.
view full answer... - Does the Ultra-Fab 5th Wheel King Pin Tripod Stabilizer Have a Galvanized FinishHey Mark, thanks for reaching out! The Ultra-Fab 5th Wheel King Pin Tripod Stabilizer # UF19-950001 has a Zinc coating which is similar to a galvanized finish, but the Zinc coating is more smooth than what you'd find with a galvanized finish. I confirmed this with my contact at Ultra-Fab.
view full answer... - What Size Threads Does the Replacement Hitch Cup Assembly for Ultra-Fab Tripod UseThe Replacement Hitch Cup Assembly for Ultra-Fab 5th Wheel King Pin Tripod Stabilizers part # UF19-001056 is a direct replacement for the Ultra-Fab 5th Wheel King Pin Tripod Stabilizer part # UF19-950001. In order to use the cup with another stabilizer you would need to ensure it accepts 1-1/4"-10 threads. If not, you would need to replace the stabilizer altogether. The EZ-Lift Gooseneck Stabilizer is not a product we carry so I cannot confirm fit.
view full answer... - Ultra Fab Tripod Stabilizer Recommendation for a Trailer with 50 inch Tall Pin BoxIf when your fifth wheel is sitting level on level ground it measure 50 inches from the pin box plate down to the ground I would recommend going with the part # UF19-950001 as it will fit just fine when set at it's highest setting and has more capacity than the aluminum part # UF19-950001.
view full answer... - Will Ultra-Fab Gooseneck Trailer Tripod Stabilizer # UF19-950400 Work for Fifth Wheel TrailerI spoke with my contact at Ultra-Fab and the stabilizer that you will need for your Grand Design Solitude fifth wheel is part # UF19-950001 for steel and part # UF19-950200 for aluminum. The Ultra-Fab Gooseneck Trailer Tripod Stabilizer, # UF19-950450, is designed for use with a gooseneck trailer and can not be modified to work with a fifth wheel trailer. For that same stabilizer made for a 5th wheel king pin you would use # UF19-950500.
view full answer... - What is the Capacity of Ultra-Fab 5th Wheel King Pin Tripod Stabilizer # UF19-950001The support capacity of the Ultra-Fab 5th Wheel King Pin Tripod Stabilizer, # UF19-950001, is 5,000 pounds, just like you have said. As long as the pin weight of your trailer does not exceed 5,000 pounds at any given time it is resting on the tripod then it will work well for you. With that said you do not want to suddenly drop 5,000 pounds on it. It should be lowered onto the tripod gradually. If you need additional length beyond the 42 to 56 inches this tripod has, you can add extension...
view full answer... - Landing Gear Stabilizer Recommendations for 2020 Sabre Fifth Wheel 36BHQI recommend the MORryde 5th Wheel Cross Brace Landing Gear Stabilizer, # MR72AR that permanently attaches to your fifth wheel's landing gear reducing movement while parked. After installation, the braces will extend and retract with your landing gear, simply hand-tighten the tubes to increase stability. For the rear of the 5th wheel, I suggest the Valterra Folding Manual Stabilizer for Trailers and RVs, # 020106. This fits RV's with 14" to 28" of frame-to-ground clearance. You can also...
view full answer... - Can the Ultra-Fab Tripod Stabilizer Be Used to Support Pinweight of Trailer without Landing GearThe Ultra-Fab 5th Wheel Tripod Stabilizer # UF19-950001 is designed for stabilization and not truly to hold a load on its' own. I really like these as stabilizers but I don't believe I would trust them to hold a load while I make repairs to my landing gear. Your best bet to make this repair is to couple the trailer to the truck and allow it to hold the load; it's going to be much safer and the way I would make this repair if I had to.
view full answer... - Trailer Stabilizers for Use on Uneven GroundThe Ultra-Fab 5th Wheel King Pin Tripod Stabilizer # UF19-950001 (and the similar but lighter aluminum model # UF19-950200) are not specifically meant for use on uneven ground but a 3-point support will naturally provide good stability. In conditions where ground is uneven using multiple stabilizers to secure multiple points on the trailer usually delivers best results. Our main page for trailer stabilizers is linked to show you all product options.
view full answer... - Fifth Wheel Trailer Stabilizer Recommendation for Trailer that Uses Andersen Ultimate AdapterSince you have an Andersen Ultimate Fifth Wheel Attachment like part # AM3225 the only option you can use for a stabilizer like the part # UF19-950450 would be one designed for a gooseneck hitch like part # UF19-950400 since the Andersen uses a gooseneck style ball.
view full answer... - What is the Replacement Hitch Cup Assembly 19-001056 Made ofThe Replacement Hitch Cup Assembly for Ultra-Fab 5th Wheel King Pin Tripod Stabilizers part # UF19-001056 is made of aluminum. I called my contact Ultra-Fab to confirm this. This cup is used on both the Ultra-Fab 5th Wheel King Pin Tripod Stabilizers part # UF19-950001 and part # UF19-950200.
view full answer... - Can The Ultra-Fab King Pin Tripod Stabilizer Be Used With A PullRite SuperLite Single Point HitchThe gooseneck style ball that's attached to your king pin would fit in the cup of the Ultra-Fab 5th Wheel King Pin Tripod Stabilizer # UF19-950001 and act as a stabilizer as you extend it up. The problem is that the shape of the cup could allow for a bit of movement or just place the downward force on the tripod at an angle since there's a lot of space so you might run into issues getting it to sit correctly. You also would not be able to use the included padlock to prevent someone from...
view full answer... - Recommended Tripod Stabilizer for Kountry Star 5th-Wheel TrailerTo stabilize your parked Newmar Kountry Star 5th-Wheel Trailer, I recommend looking at the Ultra-Fab 5th Wheel King Pin Tripod Stabilizer # UF19-950001. This tripod has a support capacity of 5,000 pounds and will help to eliminate that front-to-back and side-to-side movement you are experiencing when walking around in the trailer. It features a nice collapsible design for easy storage and an included padlock to help deter theft. The total height can be adjusted between 37 inches and 50...
view full answer... - Why Dont Extended Pin Boxes Allow Turning Clearance When Towing/Solutions for Avoiding Slider HitchSounds like you are asking about the A parameter of the following formula: (A + B) - C = Clearance A = Distance from center of fifth wheel hitch jaw to truck cab B = Length slider range/Sidewinder arm C = Width of trailer divided by 2 (to get half) You have to measure from the center of the king pin and not from the front of the trailer nose in relation to the king pin. The reason is that the king pin is where the trailer pivots. It does not pivot from the front of the trailer. Even...
view full answer... - Does 5th Wheel King Pin Tripod Help Reduce Side to Side SwayIf you are still feeling a bit of side-to-side sway even with a leveling system in your 5th wheel camper, the Ultra-Fab 5th Wheel King Pin Tripod Stabilizer # UF19-950001 will absolutely help minimize the movement you are feeling. It holds the king pin of your 5th wheel and because it has three legs that form a triangle, the force gets distributed among the legs to stop the trailer from excessive movement. This stabilizer works with king pins that are between 37" and 50" off the ground...
view full answer...
- Does Replacement Ball Assembly UF19-001057 Fit King Pin Stabilizer UF19-950001?Yes the Replacement Gooseneck Ball Assembly # UF19-001057 you were looking at will fit the Ultra-Fab 5th Wheel King Pin Tripod Stabilizer - Steel - 37" to 50" - 5,000 lbs # UF19-950001 you were looking at perfectly. I included videos of the products mentioned for you to take a look at.
view full answer... - Recommended Stabilizer Jacks For 5th Wheel With Auto Leveling SystemThe Ultra-Fab 5th Wheel King Pin Tripod Stabilizer - Steel - 37" to 50" - 5,000 lbs # UF19-950001 are great for taking away the bounce/sway and can be used with your auto-leveling 5th wheel especially the bounce in the space over the king pin. The auto-leveling jacks are great for making your system level, but are not any different in stabilizing than any other jacks. The nice feature is that stabilizing is easy once level because it is simply adding support to remain level. If you...
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Jacob T
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Halie H
Updated by:
Eric H
Video by:
Dustin K
Installed by:
Hayden R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Don S.
4/6/2017
Its been a year and the tripod looks as good as new. This is a good product and a great choice. Highly recommend and etrailer is a great company to do business with.